Debugging HTTP applications with per-route metrics
This demo is of a Ruby application that helps you manage your bookshelf. It consists of multiple microservices and uses JSON over HTTP to communicate with the other services. There are three services:
webapp: the frontend
authors: an API to manage the authors in the system
books: an API to manage the books in the system
For demo purposes, the app comes with a simple traffic generator. The overall topology looks like this:
Prerequisites
To use this guide, you’ll need to have Linkerd and its Viz extension installed on your cluster. Follow the Installing Linkerd Guide if you haven’t already done this.
Install the app
To get started, let’s install the books app onto your cluster. In your local terminal, run:
kubectl create ns booksapp && \
curl --proto '=https' --tlsv1.2 -sSfL https://run.linkerd.io/booksapp.yml \
| kubectl -n booksapp apply -f -This command creates a namespace for the demo, downloads its Kubernetes
resource manifest and uses kubectl to apply it to your cluster. The app
comprises the Kubernetes deployments and services that run in the booksapp
namespace.
Downloading a bunch of containers for the first time takes a little while. Kubernetes can tell you when all the services are running and ready for traffic. Wait for that to happen by running:
kubectl -n booksapp rollout status deploy webappYou can also take a quick look at all the components that were added to your cluster by running:
kubectl -n booksapp get allOnce the rollout has completed successfully, you can access the app itself by
port-forwarding webapp locally:
kubectl -n booksapp port-forward svc/webapp 7000 &Open http://localhost:7000/ in your browser to see the frontend.
Unfortunately, there is an error in the app: if you click Add Book, it will fail 50% of the time. This is a classic case of non-obvious, intermittent failure—the type that drives service owners mad because it is so difficult to debug. Kubernetes itself cannot detect or surface this error. From Kubernetes’s perspective, it looks like everything’s fine, but you know the application is returning errors.
Add Linkerd to the service
Now we need to add the Linkerd data plane proxies to the service. The easiest option is to do something like this:
kubectl get -n booksapp deploy -o yaml \
| linkerd inject - \
| kubectl apply -f -This command retrieves the manifest of all deployments in the booksapp
namespace, runs them through linkerd inject, and then re-applies with
kubectl apply. The linkerd inject command annotates each resource to
specify that they should have the Linkerd data plane proxies added, and
Kubernetes does this when the manifest is reapplied to the cluster. Best of
all, since Kubernetes does a rolling deploy, the application stays running the
entire time. (See Automatic Proxy Injection for
more details on how this works.)
Debugging
Let’s use Linkerd to discover the root cause of this app’s failures. To check out the Linkerd dashboard, run:
linkerd viz dashboard &
Select booksapp from the namespace dropdown and click on the
Deployments workload.
You should see all the deployments in the booksapp namespace show up. There
will be success rate, requests per second, and latency percentiles.
That’s cool, but you’ll notice that the success rate for webapp is not 100%.
This is because the traffic generator is submitting new books. You can do the
same thing yourself and push that success rate even lower. Click on webapp in
the Linkerd dashboard for a live debugging session.
You should now be looking at the detail view for the webapp service. You’ll
see that webapp is taking traffic from traffic (the load generator), and it
has two outgoing dependencies: authors and book. One is the service for
pulling in author information and the other is the service for pulling in book
information.
A failure in a dependent service may be exactly what’s causing the errors that
webapp is returning (and the errors you as a user can see when you click). We
can see that the books service is also failing. Let’s scroll a little further
down the page, we’ll see a live list of all traffic endpoints that webapp is
receiving. This is interesting:
Aha! We can see that inbound traffic coming from the webapp service going to
the books service is failing a significant percentage of the time. That could
explain why webapp was throwing intermittent failures. Let’s click on the tap
(🔬) icon and then on the Start button to look at the actual request and
response stream.
Indeed, many of these requests are returning 500’s.
It was surprisingly easy to diagnose an intermittent issue that affected only a
single route. You now have everything you need to open a detailed bug report
explaining exactly what the root cause is. If the books service was your own,
you know exactly where to look in the code.
Service Profiles
To understand the root cause, we used live traffic. For some issues this is great, but what happens if the issue is intermittent and happens in the middle of the night? Service profiles provide Linkerd with some additional information about your services. These define the routes that you’re serving and, among other things, allow for the collection of metrics on a per route basis. With Prometheus storing these metrics, you’ll be able to sleep soundly and look up intermittent issues in the morning.
One of the easiest ways to get service profiles setup is by using existing
OpenAPI (Swagger) specs. This
demo has published specs for each of its services. You can create a service
profile for webapp by running:
curl --proto '=https' --tlsv1.2 -sSfL https://run.linkerd.io/booksapp/webapp.swagger \
| linkerd -n booksapp profile --open-api - webapp \
| kubectl -n booksapp apply -f -This command will do three things:
- Fetch the swagger specification for
webapp. - Take the spec and convert it into a service profile by using the
profilecommand. - Apply this configuration to the cluster.
Alongside install and inject, profile is also a pure text operation. Check
out the profile that is generated:
apiVersion: linkerd.io/v1alpha2
kind: ServiceProfile
metadata:
creationTimestamp: null
name: webapp.booksapp.svc.cluster.local
namespace: booksapp
spec:
routes:
- condition:
method: GET
pathRegex: /
name: GET /
- condition:
method: POST
pathRegex: /authors
name: POST /authors
- condition:
method: GET
pathRegex: /authors/[^/]*
name: GET /authors/{id}
- condition:
method: POST
pathRegex: /authors/[^/]*/delete
name: POST /authors/{id}/delete
- condition:
method: POST
pathRegex: /authors/[^/]*/edit
name: POST /authors/{id}/edit
- condition:
method: POST
pathRegex: /books
name: POST /books
- condition:
method: GET
pathRegex: /books/[^/]*
name: GET /books/{id}
- condition:
method: POST
pathRegex: /books/[^/]*/delete
name: POST /books/{id}/delete
- condition:
method: POST
pathRegex: /books/[^/]*/edit
name: POST /books/{id}/editThe name refers to the FQDN of your Kubernetes service,
webapp.booksapp.svc.cluster.local in this instance. Linkerd uses the Host
header of requests to associate service profiles with requests. When the proxy
sees a Host header of webapp.booksapp.svc.cluster.local, it will use that to
look up the service profile’s configuration.
Routes are simple conditions that contain the method (GET for example) and a
regex to match the path. This allows you to group REST style resources together
instead of seeing a huge list. The names for routes can be whatever you’d like.
For this demo, the method is appended to the route regex.
To get profiles for authors and books, you can run:
curl --proto '=https' --tlsv1.2 -sSfL https://run.linkerd.io/booksapp/authors.swagger \
| linkerd -n booksapp profile --open-api - authors \
| kubectl -n booksapp apply -f -
curl --proto '=https' --tlsv1.2 -sSfL https://run.linkerd.io/booksapp/books.swagger \
| linkerd -n booksapp profile --open-api - books \
| kubectl -n booksapp apply -f -Verifying that this all works is easy when you use linkerd viz tap. Each live
request will show up with what :authority or Host header is being seen as
well as the :path and rt_route being used. Run:
linkerd viz tap -n booksapp deploy/webapp -o wide | grep reqThis will watch all the live requests flowing through webapp and look
something like:
req id=0:1 proxy=in src=10.1.3.76:57152 dst=10.1.3.74:7000 tls=true :method=POST :authority=webapp.default:7000 :path=/books/2878/edit src_res=deploy/traffic src_ns=booksapp dst_res=deploy/webapp dst_ns=booksapp rt_route=POST /books/{id}/editAs you can see:
:authorityis the correct host:pathcorrectly matchesrt_routecontains the name of the route
These metrics are part of the linkerd viz routes
command instead of linkerd viz stat. To see the
metrics that have accumulated so far, run:
linkerd viz -n booksapp routes svc/webappThis will output a table of all the routes observed and their golden metrics.
The [DEFAULT] route is a catch all for anything that does not match the
service profile.
Profiles can be used to observe outgoing requests as well as incoming requests. To do that, run:
linkerd viz -n booksapp routes deploy/webapp --to svc/booksThis will show all requests and routes that originate in the webapp deployment
and are destined to the books service. Similarly to using tap and top
views in the debugging section, the root cause of errors in this
demo is immediately apparent:
ROUTE SERVICE SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
DELETE /books/{id}.json books 100.00% 0.5rps 18ms 29ms 30ms
GET /books.json books 100.00% 1.1rps 7ms 12ms 18ms
GET /books/{id}.json books 100.00% 2.5rps 6ms 10ms 10ms
POST /books.json books 52.24% 2.2rps 23ms 34ms 39ms
PUT /books/{id}.json books 41.98% 1.4rps 73ms 97ms 99ms
[DEFAULT] books - - - - -Retries
As it can take a while to update code and roll out a new version, let’s tell Linkerd that it can retry requests to the failing endpoint. This will increase request latencies, as requests will be retried multiple times, but not require rolling out a new version.
In this application, the success rate of requests from the books deployment to
the authors service is poor. To see these metrics, run:
linkerd viz -n booksapp routes deploy/books --to svc/authorsThe output should look like:
ROUTE SERVICE SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
DELETE /authors/{id}.json authors - - - - -
GET /authors.json authors - - - - -
GET /authors/{id}.json authors - - - - -
HEAD /authors/{id}.json authors 50.85% 3.9rps 5ms 10ms 17ms
POST /authors.json authors - - - - -
[DEFAULT] authors - - - - -One thing that’s clear is that all requests from books to authors are to the
HEAD /authors/{id}.json route and those requests are failing about 50% of the
time.
To correct this, let’s edit the authors service profile and make those requests retryable by running:
kubectl -n booksapp edit sp/authors.booksapp.svc.cluster.localYou’ll want to add isRetryable to a specific route. It should look like:
spec:
routes:
- condition:
method: HEAD
pathRegex: /authors/[^/]*\.json
name: HEAD /authors/{id}.json
isRetryable: true ### ADD THIS LINE ###After editing the service profile, Linkerd will begin to retry requests to this route automatically. We see a nearly immediate improvement in success rate by running:
linkerd viz -n booksapp routes deploy/books --to svc/authors -o wideThis should look like:
ROUTE SERVICE EFFECTIVE_SUCCESS EFFECTIVE_RPS ACTUAL_SUCCESS ACTUAL_RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
DELETE /authors/{id}.json authors - - - - - 0ms
GET /authors.json authors - - - - - 0ms
GET /authors/{id}.json authors - - - - - 0ms
HEAD /authors/{id}.json authors 100.00% 2.8rps 58.45% 4.7rps 7ms 25ms 37ms
POST /authors.json authors - - - - - 0ms
[DEFAULT] authors - - - - - 0msYou’ll notice that the -o wide flag has added some columns to the routes
view. These show the difference between EFFECTIVE_SUCCESS and
ACTUAL_SUCCESS. The difference between these two show how well retries are
working. EFFECTIVE_RPS and ACTUAL_RPS show how many requests are being sent
to the destination service and and how many are being received by the client’s
Linkerd proxy.
With retries automatically happening now, success rate looks great but the p95 and p99 latencies have increased. This is to be expected because doing retries takes time.
Timeouts
Linkerd can limit how long to wait before failing outgoing requests to another service. These timeouts work by adding another key to a service profile’s routes configuration.
To get started, let’s take a look at the current latency for requests from
webapp to the books service:
linkerd viz -n booksapp routes deploy/webapp --to svc/booksThis should look something like:
ROUTE SERVICE SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
DELETE /books/{id}.json books 100.00% 0.7rps 10ms 27ms 29ms
GET /books.json books 100.00% 1.3rps 9ms 34ms 39ms
GET /books/{id}.json books 100.00% 2.0rps 9ms 52ms 91ms
POST /books.json books 100.00% 1.3rps 45ms 140ms 188ms
PUT /books/{id}.json books 100.00% 0.7rps 80ms 170ms 194ms
[DEFAULT] books - - - - -Requests to the books service’s PUT /books/{id}.json route include retries
for when that service calls the authors service as part of serving those
requests, as described in the previous section. This improves success rate, at
the cost of additional latency. For the purposes of this demo, let’s set a 25ms
timeout for calls to that route. Your latency numbers will vary depending on the
characteristics of your cluster. To edit the books service profile, run:
kubectl -n booksapp edit sp/books.booksapp.svc.cluster.localUpdate the PUT /books/{id}.json route to have a timeout:
spec:
routes:
- condition:
method: PUT
pathRegex: /books/[^/]*\.json
name: PUT /books/{id}.json
timeout: 25ms ### ADD THIS LINE ###Linkerd will now return errors to the webapp REST client when the timeout is
reached. This timeout includes retried requests and is the maximum amount of
time a REST client would wait for a response.
Run routes to see what has changed:
linkerd viz -n booksapp routes deploy/webapp --to svc/books -o wideWith timeouts happening now, the metrics will change:
ROUTE SERVICE EFFECTIVE_SUCCESS EFFECTIVE_RPS ACTUAL_SUCCESS ACTUAL_RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
DELETE /books/{id}.json books 100.00% 0.7rps 100.00% 0.7rps 8ms 46ms 49ms
GET /books.json books 100.00% 1.3rps 100.00% 1.3rps 9ms 33ms 39ms
GET /books/{id}.json books 100.00% 2.2rps 100.00% 2.2rps 8ms 19ms 28ms
POST /books.json books 100.00% 1.3rps 100.00% 1.3rps 27ms 81ms 96ms
PUT /books/{id}.json books 86.96% 0.8rps 100.00% 0.7rps 75ms 98ms 100ms
[DEFAULT] books - - - - -The latency numbers include time spent in the webapp application itself, so
it’s expected that they exceed the 25ms timeout that we set for requests from
webapp to books. We can see that the timeouts are working by observing that
the effective success rate for our route has dropped below 100%.
Clean Up
To remove the books app and the booksapp namespace from your cluster, run:
curl --proto '=https' --tlsv1.2 -sSfL https://run.linkerd.io/booksapp.yml \
| kubectl -n booksapp delete -f - \
&& kubectl delete ns booksapp