This is not the latest version of Linkerd!
This documentation is for an older version of Linkerd. You may want the Linkerd 2.12 (current) documentation instead.

Upgrading Linkerd

In this guide, we’ll walk you through how to perform zero-downtime upgrades for Linkerd.

Read through this guide carefully. Additionally, before starting a specific upgrade, please read through the version-specific upgrade notices below, which may contain important information about your version.

Version numbering

Linkerd follows a version numbering scheme of the form 2.<major>.<minor>. In other words, “2” is a static prefix, followed by the major version, then the minor.

Changes in minor versions are intended to be backwards compatible with the previous version. Changes in major version may introduce breaking changes, although we try to avoid that whenever possible.

Upgrade paths

The following upgrade paths are generally safe. However, before starting a deploy, it is important to check the upgrade notes before proceeding—occasionally, specific minor releases may have additional restrictions.

Within the same major version. It is usually safe to upgrade to the latest minor version within the same major version. In other words, if you are currently running version 2.x.y, upgrading to 2.x.z, where z is the latest minor version for major version x, is safe. This is true even if you would skip intermediate intermediate minor versions, i.e. it is still safe even if z > y + 1.

To the next major version. It is usually safe to upgrade to the latest minor version of the next major version. In other words, if you are currently running version 2.x.y, upgrading to 2.x + 1.w will be safe, where w is the latest minor version available for major version x + 1.

To later major versions. Upgrades that skip one or more major versions are not supported. Instead, you should upgrade major versions incrementally.

Again, please check the upgrade notes for the specific version you are upgrading to for any version-specific caveats.

Data plane vs control plane version skew

It is usually safe to run Linkerd’s control plane with the data plane from one major version earlier. (This skew is a natural consequence of upgrading.) This is independent of minor version, i.e. a 2.x.y data plane and a 2.x + 1.z control plane will work regardless of y and z.

Please check the version-specific upgrade notes before proceeding.

Note that new features introduced by the release may not be available for workloads with older data planes.

Overall upgrade process

There are four components that need to be upgraded:

These steps should be performed in sequence.

Before upgrading

Before you commence an upgrade, you should ensure that the current state of Linkerd is healthy, e.g. by using linkerd check. For major version upgrades, you should also ensure that your data plane is up-to-date, e.g. with linkerd check --proxy, to avoid unintentional version skew.

Upgrading the CLI

The CLI can be used to validate whether Linkerd was installed correctly.

To upgrade the CLI, run:

curl --proto '=https' --tlsv1.2 -sSfL https://run.linkerd.io/install | sh

Alternatively, you can download the CLI directly via the Linkerd releases page.

Verify the CLI is installed and running the expected version with:

linkerd version --client

Upgrading the control plane

With the Linkerd CLI

For users who have installed Linkerd via the CLI, the linkerd upgrade command will upgrade the control plane. This command ensures that all of the control plane’s existing configuration and TLS secrets are retained. Notice that we use the --prune flag to remove any Linkerd resources from the previous version which no longer exist in the new version.

linkerd upgrade | kubectl apply --prune -l linkerd.io/control-plane-ns=linkerd -f -

Next, run this command again with some --prune-whitelist flags added. This is necessary to make sure that certain cluster-scoped resources are correctly pruned.

linkerd upgrade | kubectl apply --prune -l linkerd.io/control-plane-ns=linkerd \
  --prune-whitelist=rbac.authorization.k8s.io/v1/clusterrole \
  --prune-whitelist=rbac.authorization.k8s.io/v1/clusterrolebinding \
  --prune-whitelist=apiregistration.k8s.io/v1/apiservice -f -

With Helm

For Helm control plane installations, please follow the instructions at Helm upgrade procedure.

Verifying the control plane upgrade

Once the upgrade process completes, check to make sure everything is healthy by running:

linkerd check

This will run through a set of checks against your control plane and make sure that it is operating correctly.

To verify the Linkerd control plane version, run:

linkerd version

Which should display the latest versions for both client and server.

Upgrading extensions

Linkerd’s extensions provide additional functionality to Linkerd in a modular way. Generally speaking, extensions are versioned separately from Linkerd releases and follow their own schedule; however, some extensions are updated alongside Linkerd releases and you may wish to update them as part of the same process.

Each extension can be upgraded independently. If using Helm, the procedure is similar to the control plane upgrade, using the respective charts. For the CLI, the extension CLI commands don’t provide upgrade subcommands, but using install again is fine. For example:

linkerd viz install | kubectl apply -f -
linkerd multicluster install | kubectl apply -f -
linkerd jaeger install | kubectl apply -f -

Upgrading the data plane

Upgrading the data plane requires updating the proxy added to each meshed workload. Since pods are immutable in Kubernetes, Linkerd is unable to simply update the proxies in place. Thus, the standard option is to restart each workload, allowing the proxy injector to inject the latest version of the proxy as they come up.

For example, you can use the kubectl rollout restart command to restart a meshed deployment:

kubectl -n <namespace> rollout restart deploy

As described earlier, a skew of one major version between data plane and control plane is always supported. Thus, for some systems it is possible to do this data plane upgrade “lazily”, and simply allow workloads to pick up the newest proxy as they are restarted for other reasons (e.g. for new code rollouts). However, newer features may only be available on workloads with the latest proxy.

A skew of more than one major version between data plane and control plane is not supported.

Verify the data plane upgrade

Check to make sure everything is healthy by running:

linkerd check --proxy

This will run through a set of checks to verify that the data plane is operating correctly, and will list any pods that are still running older versions of the proxy.

Congratulation! You have successfully upgraded your Linkerd to the newer version.

Upgrading Multicluster

Upgrading the multicluster extension doesn’t cause downtime in the traffic going through the mirrored services, unless otherwise noted in the version-specific notes below. Note however that for the service mirror deployments (which control the creation of the mirrored services) to be updated, you need to re-link your clusters through linkerd multicluster link.

Upgrade notices

Upgrade notice: stable-2.11.0

The minimum Kubernetes version supported is now v1.17.0.

There are two breaking changes in the 2.11.0 release: pods in ingress no longer support non-HTTP traffic to meshed workloads; and the proxy no longer forwards traffic to ports that are bound only to localhost.

Users of the multi-cluster extension will need to re-link their cluster after upgrading.

The Linkerd proxy container is now the first container in the pod. This may affect tooling that assumed the application was the first container in the pod.

Control plane changes

The controller pod has been removed from the control plane. All configuration options that previously applied to it are no longer valid (e.g publicAPIResources and all of its nested fields). Additionally, the destination pod has a new policy container that runs the policy controller.

Data plane changes

In order to fix a class of startup race conditions, the container ordering within meshed pods has changed so that the Linkerd proxy container is now the first container in the pod, the application container now waits to start until the proxy is ready. This may affect tooling that assumed the application container was the first container in the pod.

Using linkerd-await to enforce container startup ordering is thus longer necessary. (However, using linkerd-await -S to ensure proxy shutdown in Jobs and Cronjobs is still valid.)

Routing breaking changes

There are two breaking changes to be aware of when it comes to how traffic is routed.

First, when the proxy runs in ingress mode (config.linkerd.io/inject: ingress), non-HTTP traffic to meshed pods is no longer supported. To get around this, you will need to use the config.linkerd.io/skip-outbound-ports annotation on your ingress controller pod. In many cases, ingress mode is no longer necessary. Before upgrading, it may be worth revisiting how to use ingress with Linkerd.

Second, the proxy will no longer forward traffic to ports only bound on localhost, such as 127.0.0.1:8080. Services that want to receive traffic from other pods should now be bound to a public interface (e.g 0.0.0.0:8080). This change prevents ports from being accidentally exposed outside of the pod.

Multicluster

The gateway component has been changed to use a pause container instead of nginx. This change should reduce the footprint of the extension; the proxy routes traffic internally and does not need to rely on nginx to receive or forward traffic. While this will not cause any downtime when upgrading multicluster, it does affect probing. linkerd multicluster gateways will falsely advertise the target cluster gateway as being down until the clusters are re-linked.

Multicluster now supports NodePort type services for the gateway. To support this change, the configuration options in the Helm values file are now grouped under the gateway field. If you have installed the extension with other options than the provided defaults, you will need to update your values.yaml file to reflect this change in field grouping.

Other changes

Besides the breaking changes described above, there are other minor changes to be aware of when upgrading from stable-2.10.x:

  • PodSecurityPolicy (PSP) resources are no longer installed by default as a result of their deprecation in Kubernetes v1.21 and above. The control plane and core extensions will now be shipped without PSPs; they can be enabled through a new install option enablePSP: true.
  • The tcp_connection_duration_ms metric has been removed.
  • Opaque ports changes: 443 is no longer included in the default opaque ports list. Ports 4444, 6379 and 9300 corresponding to Galera, Redis and ElasticSearch respectively (all server speak first protocols) have been added to the default opaque ports list. The default ignore inbound ports list has also been changed to include ports 4567 and 4568.

Upgrade notice: stable-2.10.0

If you are currently running Linkerd 2.9.0, 2.9.1, 2.9.2, or 2.9.3 (but not 2.9.4), and you upgraded to that release using the --prune flag (as opposed to installing it fresh), you will need to use the linkerd repair command as outlined in the Linkerd 2.9.3 upgrade notes before you can upgrade to Linkerd 2.10.

Additionally, there are two changes in the 2.10.0 release that may affect you. First, the handling of certain ports and protocols has changed. Please read through our ports and protocols in 2.10 upgrade guide for the repercussions.

Second, we’ve introduced extensions and moved the default visualization components into a Linkerd-Viz extension. Read on for what this means for you.

Visualization components moved to Linkerd-Viz extension

With the introduction of extensions, all of the Linkerd control plane components related to visibility (including Prometheus, Grafana, Web, and Tap) have been removed from the main Linkerd control plane and moved into the Linkerd-Viz extension. This means that when you upgrade to stable-2.10.0, these components will be removed from your cluster and you will not be able to run commands such as linkerd stat or linkerd dashboard. To restore this functionality, you must install the Linkerd-Viz extension by running linkerd viz install | kubectl apply -f - and then invoke those commands through linkerd viz stat, linkerd viz dashboard, etc.

# Upgrade the control plane (this will remove viz components).
linkerd upgrade | kubectl apply --prune -l linkerd.io/control-plane-ns=linkerd -f -
# Prune cluster-scoped resources
linkerd upgrade | kubectl apply --prune -l linkerd.io/control-plane-ns=linkerd \
  --prune-whitelist=rbac.authorization.k8s.io/v1/clusterrole \
  --prune-whitelist=rbac.authorization.k8s.io/v1/clusterrolebinding \
  --prune-whitelist=apiregistration.k8s.io/v1/apiservice -f -
# Install the Linkerd-Viz extension to restore viz functionality.
linkerd viz install | kubectl apply -f -

Helm users should note that configuration values related to these visibility components have moved to the Linkerd-Viz chart. Please update any values overrides you have and use these updated overrides when upgrading the Linkerd chart or installing the Linkerd-Viz chart. See below for a complete list of values which have moved.

helm repo update
# Upgrade the control plane (this will remove viz components).
helm upgrade linkerd2 linkerd/linkerd2 --reset-values -f values.yaml --atomic
# Install the Linkerd-Viz extension to restore viz functionality.
helm install linkerd2-viz linkerd/linkerd2-viz -f viz-values.yaml

The following values were removed from the Linkerd2 chart. Most of the removed values have been moved to the Linkerd-Viz chart or the Linkerd-Jaeger chart.

  • dashboard.replicas moved to Linkerd-Viz as dashboard.replicas
  • tap moved to Linkerd-Viz as tap
  • tapResources moved to Linkerd-Viz as tap.resources
  • tapProxyResources moved to Linkerd-Viz as tap.proxy.resources
  • webImage moved to Linkerd-Viz as dashboard.image
  • webResources moved to Linkerd-Viz as dashboard.resources
  • webProxyResources moved to Linkerd-Viz as dashboard.proxy.resources
  • grafana moved to Linkerd-Viz as grafana
  • grafana.proxy moved to Linkerd-Viz as grafana.proxy
  • prometheus moved to Linkerd-Viz as prometheus
  • prometheus.proxy moved to Linkerd-Viz as prometheus.proxy
  • global.proxy.trace.collectorSvcAddr moved to Linkerd-Jaeger as webhook.collectorSvcAddr
  • global.proxy.trace.collectorSvcAccount moved to Linkerd-Jaeger as webhook.collectorSvcAccount
  • tracing.enabled removed
  • tracing.collector moved to Linkerd-Jaeger as collector
  • tracing.jaeger moved to Linkerd-Jaeger as jaeger

Also please note the global scope from the Linkerd2 chart values has been dropped, moving the config values underneath it into the root scope. Any values you had customized there will need to be migrated; in particular identityTrustAnchorsPEM in order to conserve the value you set during install.”

Upgrade notice: stable-2.9.4

See upgrade notes for 2.9.3 below.

Upgrade notice: stable-2.9.3

Linkerd Repair

Due to a known issue in versions stable-2.9.0, stable-2.9.1, and stable-2.9.2, users who upgraded to one of those versions with the –prune flag (as described above) will have deleted the secret/linkerd-config-overrides resource which is necessary for performing any subsequent upgrades. Linkerd stable-2.9.3 includes a new linkerd repair command which restores this deleted resource. If you see unexpected error messages during upgrade such as “failed to read CA: not PEM-encoded”, please upgrade your CLI to stable-2.9.3 and run:

linkerd repair | kubectl apply -f -

This will restore the secret/linkerd-config-overrides resource and allow you to proceed with upgrading your control plane.

Upgrade notice: stable-2.9.0

Images are now hosted on ghcr.io

As of this version images are now hosted under ghcr.io instead of gcr.io. If you’re pulling images into a private repo please make the necessary changes.

Upgrading multicluster environments

Linkerd 2.9 changes the way that some of the multicluster components work and are installed compared to Linkerd 2.8.x. Users installing the multicluster components for the first time with Linkerd 2.9 can ignore these instructions and instead refer directly to the installing multicluster instructions.

Users who installed the multicluster component in Linkerd 2.8.x and wish to upgrade to Linkerd 2.9 should follow the upgrade multicluster instructions.

Ingress behavior changes

In previous versions when you injected your ingress controller (Nginx, Traefik, Ambassador, etc), then the ingress’ balancing/routing choices would be overridden with Linkerd’s (using service profiles, traffic splits, etc.).

As of 2.9 the ingress’s choices are honored instead, which allows preserving things like session-stickiness. Note however that this means per-route metrics are not collected, traffic splits will not be honored and retries/timeouts are not applied.

If you want to revert to the previous behavior, inject the proxy into the ingress controller using the annotation linkerd.io/inject: ingress, as explained in using ingress

Breaking changes in Helm charts

Some entries like controllerLogLevel and all the Prometheus config have changed their position in the settings hierarchy. To get a precise view of what has changed you can compare the stable-2.8.1 and stable-2.9.0 values.yaml files.

Post-upgrade cleanup

In order to better support cert-manager, the secrets linkerd-proxy-injector-tls, linkerd-sp-validator-tls and linkerd-tap-tls have been replaced by the secrets linkerd-proxy-injector-k8s-tls, linkerd-sp-validator-k8s-tls and linkerd-tap-k8s-tls respectively. If you upgraded through the CLI, please delete the old ones (if you upgraded through Helm the cleanup was automated).