Configuring Per-Route Policy

In addition to enforcing authorization policies at the service level, finer-grained authorization policies can also be configured for individual HTTP routes. In this example, we’ll use the Books demo app to demonstrate how to control which clients can access particular routes on a service.

This is an advanced example that demonstrates more complex policy configuration. For a basic introduction to Linkerd authorization policy, start with the Restricting Access to Services example. For more comprehensive documentation of the policy resources, see the Policy reference docs.

Prerequisites

To use this guide, you’ll need to have Linkerd installed on your cluster, along with its Viz extension. Follow the Installing Linkerd Guide if you haven’t already done this.

Install the Books demo application

Inject and install the Books demo application:

$ kubectl create ns booksapp && \
  curl --proto '=https' --tlsv1.2 -sSfL https://run.linkerd.io/booksapp.yml \
  | linkerd inject - \
  | kubectl -n booksapp apply -f -

This command creates a namespace for the demo, downloads its Kubernetes resource manifest, injects Linkerd into the application, and uses kubectl to apply it to your cluster. The app comprises the Kubernetes deployments and services that run in the booksapp namespace.

Confirm that the Linkerd data plane was injected successfully:

$ linkerd check -n booksapp --proxy -o short

You can take a quick look at all the components that were added to your cluster by running:

$ kubectl -n booksapp get all

Once the rollout has completed successfully, you can access the app itself by port-forwarding webapp locally:

$ kubectl -n booksapp port-forward svc/webapp 7000 &

Open http://localhost:7000/ in your browser to see the frontend.

Creating a Server resource

Both the books service and the webapp service in the demo application are clients of the authors service.

However, these services send different requests to the authors service. The books service should only send GET requests to the /authors/:id.json route, to get the author associated with a particular book. Meanwhile, the webapp service may also send DELETE and PUT requests to /authors, and POST requests to /authors.json, as it allows the user to create and delete authors.

Since the books service should never need to create or delete authors, we will create separate authorization policies for the webapp and books services, restricting which services can access individual routes of the authors service.

First, let’s run the linkerd viz authz command to list the authorization resources that currently exist for the authors deployment:

$ linkerd viz authz -n booksapp deploy/authors
ROUTE    SERVER                       AUTHORIZATION                UNAUTHORIZED  SUCCESS     RPS  LATENCY_P50  LATENCY_P95  LATENCY_P99
default  default:all-unauthenticated  default/all-unauthenticated        0.0rps   70.31%  8.1rps          1ms         43ms         49ms
probe    default:all-unauthenticated  default/probe                      0.0rps  100.00%  0.3rps          1ms          1ms          1ms

By default, the authors deployment uses the cluster’s default authorization policy, “all-unauthenticated”. In addition, a separate authorization is generated to allow liveness and readiness probes from the kubelet.

First, we’ll create a Server resource for the authors deployment’s service port. For details on Server resources, see here.

kubectl apply -f - <<EOF

---
apiVersion: policy.linkerd.io/v1beta1
kind: Server
metadata:
  name: authors-server
  namespace: booksapp
spec:
  podSelector:
    matchLabels:
      app: authors
      project: booksapp
  port: service
EOF

Now that we’ve defined a Server for the authors Deployment, we can run the linkerd viz authz command again, and see that all traffic to authors is currently unauthorized:

$ linkerd viz authz -n booksapp deploy/authors
ROUTE    SERVER                       AUTHORIZATION                UNAUTHORIZED  SUCCESS     RPS  LATENCY_P50  LATENCY_P95  LATENCY_P99
default  authors-server                                                  9.5rps    0.00%  0.0rps          0ms          0ms          0ms
probe    authors-server               default/probe                      0.0rps  100.00%  0.1rps          1ms          1ms          1ms
default  default:all-unauthenticated  default/all-unauthenticated        0.0rps  100.00%  0.1rps          1ms          1ms          1ms
probe    default:all-unauthenticated  default/probe                      0.0rps  100.00%  0.2rps          1ms          1ms          1ms

Next, we’ll create per-route policy resources to authorize traffic to the authors deployment.

Creating per-route policy resources

The HTTPRoute resource is used to configure policy for individual HTTP routes, by defining how to match a request for a given route. We will now create HTTPRoute resources for the authors service.

Note

Routes configured in service profiles are different from HTTPRoute resources. Service profile routes allow you to collect per-route metrics and configure client-side behavior such as retries and timeouts. HTTPRoute resources, on the other hand, can be the target of AuthorizationPolicies and allow you to specify per-route authorization.

First, let’s create an HTTPRoute that matches GET requests to the authors service’s API:

kubectl apply -f - <<EOF

---
apiVersion: policy.linkerd.io/v1beta1
kind: HTTPRoute
metadata:
  name: authors-get-route
  namespace: booksapp
spec:
  parentRefs:
    - name: authors-server
      kind: Server
      group: policy.linkerd.io
  rules:
    - matches:
      - path:
          value: "/authors.json"
        method: GET
      - path:
          value: "/authors/"
          type: "PathPrefix"
        method: GET
EOF

This will create an HTTPRoute targeting the authors-server Server resource we defined previously. The rules section defines a list of matches, which determine which requests match the HTTPRoute. Here, we ’ve defined a match rule that matches GET requests to the path /authors.json, and a second match rule that matches GET requests to paths starting with the path segment /authors.

Now that we’ve created a route, we can associate policy with that route. We’ll create an AuthorizationPolicy resource that defines policy for our

kubectl apply -f - <<EOF

---
apiVersion: policy.linkerd.io/v1alpha1
kind: AuthorizationPolicy
metadata:
  name: authors-get-policy
  namespace: booksapp
spec:
  targetRef:
    group: policy.linkerd.io
    kind: HTTPRoute
    name: authors-get-route
  requiredAuthenticationRefs:
    - name: authors-get-authn
      kind: MeshTLSAuthentication
      group: policy.linkerd.io
---
apiVersion: policy.linkerd.io/v1alpha1
kind: MeshTLSAuthentication
metadata:
  name: authors-get-authn
  namespace: booksapp
spec:
  identities:
    - "books.booksapp.serviceaccount.identity.linkerd.cluster.local"
    - "webapp.booksapp.serviceaccount.identity.linkerd.cluster.local"
EOF

This command creates an AuthorizationPolicy whose targetRef selects the authors-get-route HTTPRoute resource we just created. An AuthorizationPolicy resource can require a a variety of forms of authentication. In this case, we we’ve defined a MeshTLSAuthentication resource, named authors-get-authn, that requires the TLS identity of the client to match the ServiceAccount of either the books service or the webapp service.

Additionally, because we have created an HTTPRoute referencing the authors service, the default route for liveness and readiness probes will no longer be used, and the authors service will become unready.

Therefore, we must also create a HTTPRoute and AuthorizationPolicy so that probes from the Kubelet are still authorized:

kubectl apply -f - <<EOF

---
apiVersion: policy.linkerd.io/v1beta1
kind: HTTPRoute
metadata:
  name: authors-probe-route
  namespace: booksapp
spec:
  parentRefs:
    - name: authors-server
      kind: Server
      group: policy.linkerd.io
  rules:
    - matches:
      - path:
          value: "/ping"
        method: GET
---
apiVersion: policy.linkerd.io/v1alpha1
kind: NetworkAuthentication
metadata:
  name: authors-probe-authn
  namespace: booksapp
spec:
  networks:
  - cidr: 0.0.0.0/0
  - cidr: ::/0
---
apiVersion: policy.linkerd.io/v1alpha1
kind: AuthorizationPolicy
metadata:
  name: authors-probe-policy
  namespace: booksapp
spec:
  targetRef:
    group: policy.linkerd.io
    kind: HTTPRoute
    name: authors-probe-route
  requiredAuthenticationRefs:
    - name: authors-probe-authn
      kind: NetworkAuthentication
      group: policy.linkerd.io
EOF

Here, we use the NetworkAuthentication resource (rather than MeshTLSAuthentication) to authenticate only probes coming from the local network (0.0.0.0).

Running linkerd viz authz again, we can now see that our new policies exist:

$ linkerd viz authz -n booksapp deploy/authors
ROUTE                SERVER                       AUTHORIZATION                             UNAUTHORIZED  SUCCESS     RPS  LATENCY_P50  LATENCY_P95  LATENCY_P99
authors-get-route    authors-server               authorizationpolicy/authors-get-policy          0.0rps  100.00%  0.1rps          2ms          2ms          2ms
authors-probe-route  authors-server               authorizationpolicy/authors-probe-policy        0.0rps  100.00%  0.1rps          1ms          1ms          1ms
default              default:all-unauthenticated  default/all-unauthenticated                     0.0rps  100.00%  0.1rps          2ms          2ms          2ms
probe                default:all-unauthenticated  default/probe                                   0.0rps  100.00%  0.2rps          1ms          1ms          1ms

And, if we open http://localhost:7000/ and interact with the frontend, the lists of authors and books are still displayed correctly.

Authorizing additional routes

However, if we try to create a new author or delete an existing author in the web UI, we may notice that something is amiss.

Attempting to delete an author results in a “not found” error in the web UI:

and similarly, adding a new author takes us to an error page.

This is because creating or deleting an author will send a PUT or DELETE request, respectively, from webapp to authors. The route we created to authorize GET requests does not match PUT or DELETE requests, so the authors proxy rejects those requests with a 404 error.

To resolve this, we’ll create an additional HTTPRoute resource that matches PUT, POST, and DELETE requests:

kubectl apply -f - <<EOF

---
apiVersion: policy.linkerd.io/v1beta1
kind: HTTPRoute
metadata:
  name: authors-modify-route
  namespace: booksapp
spec:
  parentRefs:
    - name: authors-server
      kind: Server
      group: policy.linkerd.io
  rules:
    - matches:
      - path:
          value: "/authors/"
          type: "PathPrefix"
        method: DELETE
      - path:
          value: "/authors/"
          type: "PathPrefix"
        method: PUT
      - path:
          value: "/authors.json"
        method: POST
EOF

What happens if we try to delete an author now? We still see a failure, but a different one:

This is because we have created a route matching DELETE, PUT, and POST requests, but we haven’t authorized requests to that route. Running the linkerd viz authz command again confirms this — note the unauthorized requests to authors-modify-route:

$ linkerd viz authz -n booksapp deploy/authors
ROUTE                 SERVER                       AUTHORIZATION                             UNAUTHORIZED  SUCCESS     RPS  LATENCY_P50  LATENCY_P95  LATENCY_P99
authors-get-route     authors-server               authorizationpolicy/authors-get-policy               -        -       -            -            -            -
authors-modify-route  authors-server                                                               9.7rps    0.00%  0.0rps          0ms          0ms          0ms
authors-probe-route   authors-server               authorizationpolicy/authors-probe-policy        0.0rps  100.00%  0.1rps          1ms          1ms          1ms
default               default:all-unauthenticated  default/all-unauthenticated                     0.0rps  100.00%  0.1rps          1ms          1ms          1ms
probe                 default:all-unauthenticated  default/probe                                   0.0rps  100.00%  0.2rps          1ms          1ms          1ms

Now, let’s create authorization and authentication policy resources to authorize this route:

kubectl apply -f - <<EOF

---
apiVersion: policy.linkerd.io/v1alpha1
kind: AuthorizationPolicy
metadata:
  name: authors-modify-policy
  namespace: booksapp
spec:
  targetRef:
    group: policy.linkerd.io
    kind: HTTPRoute
    name: authors-modify-route
  requiredAuthenticationRefs:
    - name: authors-modify-authn
      kind: MeshTLSAuthentication
      group: policy.linkerd.io
---
apiVersion: policy.linkerd.io/v1alpha1
kind: MeshTLSAuthentication
metadata:
  name: authors-modify-authn
  namespace: booksapp
spec:
  identities:
    - "webapp.booksapp.serviceaccount.identity.linkerd.cluster.local"
EOF

These configurations are very similar to the AuthorizationPolicy and MeshTLSAuthentication resources we created in the previous section. However, in this case, we only authenticate the webapp deployment’s ServiceAccount (and not the books deployment) to access this route.

Now, if we attempt to delete an author in the frontend once again, we can:

Similarly, we can now create a new author successfully, as well:

Running the linkerd viz authz command one last time, we now see that all traffic is authorized:

$ linkerd viz authz -n booksapp deploy/authors
ROUTE                 SERVER                       AUTHORIZATION                              UNAUTHORIZED  SUCCESS     RPS  LATENCY_P50  LATENCY_P95  LATENCY_P99
authors-get-route     authors-server               authorizationpolicy/authors-get-policy           0.0rps  100.00%  0.1rps          0ms          0ms          0ms
authors-modify-route  authors-server               authorizationpolicy/authors-modify-policy        0.0rps  100.00%  0.0rps          0ms          0ms          0ms
authors-probe-route   authors-server               authorizationpolicy/authors-probe-policy         0.0rps  100.00%  0.1rps          1ms          1ms          1ms
default               default:all-unauthenticated  default/all-unauthenticated                      0.0rps  100.00%  0.1rps          1ms          1ms          1ms
probe                 default:all-unauthenticated  default/probe                                    0.0rps  100.00%  0.2rps          1ms          1ms          1ms

Next Steps

We’ve now covered the basics of configuring per-route authorization policies with Linkerd. For more practice, try creating additional policies to restrict access to the books service as well. Or, to learn more about Linkerd authorization policy in general, and the various configurations that are available, see the Policy reference docs.